Parallel Port - Xerox DocuColor DocuColor 4 User Manual

Mac OS
To print to the DocuColor 4 LP/CP you need:
A Mac OS-based computer
At least 8MB of RAM
EtherTalk installed
Apple System software version 7.6.1 or later
Adobe PostScript Printer Driver version 8.5 or later (version 8.5.1 is included with the
user software)
To use the Fiery WebTools, you also need:
A Power Macintosh computer
At least 32MB of RAM
A TCP/IP enabled network and the IP address or DNS name of the DocuColor 4 LP/CP
Netscape Communicator v4.0 or later with Java enabled
Netscape continues to release frequent updates to its browser. As support cannot be
guaranteed for all versions, use the version specified above for best results.

Parallel port

To print to the DocuColor 4 LP/CP using the parallel port, you need:
A Windows-based computer with an 80486, AMD, or Pentium processor
At least 4MB of RAM
A standard IEEE 1284 parallel cable. The cable must have a 1284-B male connector on
one end that connects to the DocuColor 4 LP/CP parallel connector.
This connection is an option for DocuColor 4 CP. The parallel cable for DocuColor 4 CP
is a mini Centronics that can be ordered from Xerox. Part number is 98S4330.
xvi