SMART Board M685ix2 Configuration And User's Manual page 81

APPENDIX B
REMOTELY MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
Setting Use
Status Displays the current network
status (Connected,
Disconnected or Off).
DHCP Displays the status of the
network's Dynamic Host
Configuration Protocol (DHCP)
as On or Off.
Password E-mails the network password
Reminder to the predefined e-mail
recipient.
IP Address Displays the projector's current
IP address in values between
0.0.0.0 and 255.255.255.255.
Subnet Mask Displays the projector's subnet
mask number in values
between 0.0.0.0 and
255.255.255.255.
Gateway Displays the projector's default
network gateway in values
between 0.0.0.0 and
255.255.255.255.
DNS Displays the projector's primary
domain name server (DNS) IP
address in values between
0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector's MAC
address in xx-xx-xx-xx-xx-xx
format.
Group Name Displays the projector's
workgroup name as set by an
administrator (maximum 12
characters).
73 smarttech.com/kb/170548
Notes
The default is off.
The default is on.
On enables a DHCP server on the network to
automatically assign an IP address to the
projector.
Off enables an administrator to assign an IP
address manually.
See Web page management on page 43 to
set up a destination e-mail address.
To change the projector's IP address, use the
RS-232 connector or use a DHCP server to
assign a dynamic IP address, and then set a
static IP address using the network remote
management feature (see Remotely
managing your system through a network
interface on page 43).
You can set the projector's workgroup name
using the remote management features (see
Remotely managing your system through a
network interface on page 43 and Remotely
managing your system through an RS-232
serial interface on page 53).