Control Panel Ii - SMART Board M685ix2 Configuration And User's Manual

APPENDIX A
REMOTELY MANAGING YOUR SYSTEM THROUGH A NETWORK INTERFACE
Submenu setting
Startup Screen
High Speed Fan
Projector Mode
Source
SMART Fixed Install (FI) /
SMART Desktop mode (DT)
HDMI1
HDMI2
VGA1
Emergency Alert
Alarm Message / Alert
Message

Control panel II

This menu enables you to manage the projector 3d feature settings.
Submenu setting
USB1 Source
USB2 Source
47 smarttech.com/kb/170548
Description
Sets the type of startup screen to SMART or User. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup
Screen function.
Adjusts the speed of the projector's fan. Select High or Normal.
NOTE
Use the High setting when the projector's temperature is high or
the altitude is above 6000' (1800 m).
Adjusts the projection mode to Front, Ceiling, Rear or Rear Ceiling.
IMPORTANT
SMART recommends that you never change this setting from the
Ceiling projection mode.
Adjusts the input source to VGA, HDMI1 or HDMI2.
User-defined tag not currently used. Reserved for future
application.
Assigns an alternative name to your HDMI1 input, which appears
when you select the HDMI1 input.
Assigns an alternative name to your HDMI2 input, which appears
when you select the HDMI2 input.
Assigns an alternative name to your VGA 1 input, which appears
when you select the VGA 1 input.
Turns the on-screen alert broadcast message on or off. When
enabled, this message displays over the current projected image.
Displays an on-screen emergency notification message (maximum
60 characters).
Description
Associates the input source to VGA, HDMI1 or HDMI2.
Associates the input source to VGA, HDMI1 or HDMI2.