SMART Board M685ix2 Configuration And User's Manual page 80

APPENDIX B
REMOTELY MANAGING YOUR SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
Setting Use
Startup Screen Selects the type of startup
screen (SMART, Capture User
Startup Screen, Preview
Startup Screen), or Image
Alignment Screen.
Image Enables you to adjust the
Alignment projected image size, shape
Screen and location.
Set to Default? Resets projector settings to
their default values.
Opens a sub-menu that
USB Source
enables you to select the
Select
video input on your projector
and the USB receptacle on the
ECP.
Network menu
Network Activates the projector's RJ45
connector and network
features.
72 smarttech.com/kb/170548
Notes
This screen displays when the projector lamp
is starting and a video source signal isn't
displayed.
SMART displays the default SMART logo on
a blue background.
Capture User Startup Screen closes the on-
screen display menu and captures the entire
projected image. The captured image is
displayed the next time the on-screen display
opens. (The capture can take up to one
minute, depending on the complexity of the
background graphic.)
Preview Startup Screen enables you to
preview the default or captured startup
screen.
Image Alignment Screen enables you to
adjust the projected image size, shape and
location.
The image alignment screen appears the first
time you start your projector. However, you
can access it from the startup screen menu
any time. Press Menu or Enter to close it.
If you select Yes, all projector settings reset
to their defaults, reversing any menu changes
you made. This action is irreversible.
Don't adjust this setting unless you want to
reset all of the applied settings, or unless
you're advised to by a SMART Support
specialist.
The defaults are:
HDMI-1, USB 1
l
HDMI-2, Disabled (no associated USB
l
input)
VGA-1, USB 2
l