SMART Board M685ix2 Configuration And User's Manual page 89

APPENDIX C
INTEGRATING OTHER DEVICES
To connect a peripheral source or output to your projector
1. Connect your peripheral device's input cables to the projector.
2. Switch input sources to the peripheral device by pressing the Input button on the remote
control.
To connect a laptop to a SMART Board interactive whiteboard system
1. Connect a USB cable from the laptop to the appropriate USB port on the back of the pen tray.
2. Connect a VGA cable from the laptop to the projector.
OR
Connect an HDMI cable from the laptop to the projector.
3. Press the Input button on the remote control or the Input Select button on the pen tray to
switch input sources to the laptop.
The SMART UX80 projector allows synchronization between two adjacent systems. The two
projectors can be connected with a Cat 5 crossover cable to allow the control of the power states
through a single interactive whiteboard, through the remote control or through a room control
system.
To connect a second projector
Connect a Cat 5 crossover cable to the Projector 2 port of the primary SMART UX80 projector
and into the Projector 2 port of the secondary SMART UX80 projector.
NOTE
The Projector 2 ports synchronize power states only and don't carry audio or video.
81 smarttech.com/kb/170548