SMART Board M685ix2 Configuration And User's Manual page 29

CHAPTER 3
USING YOUR INTERACTIVE WHITEBOARD SYSTEM
Setting Use
Language menu
Language Selects language preference.
Information menu
Lamp Hours Displays the current number of
lamp usage hours from 0 to
4000 hours from when it was
last reset.
Input Displays the currently
displayed video input source
(VGA, HDMI1, HDMI2 or None).
Resolution Displays the projector's most
recently detected video
source signal resolution and
refresh rate.
Firmware Displays the projector's digital
Version display processor (DDP)
firmware version in x.x.x.x
format.
MPU Version Displays the projector
microprocessor unit (MPU)
firmware version in x.x.x.x
format.
Network Version Displays the projector's
network communications
processor firmware version in
x.x.x.x format.
Model Number Displays the projector's model
number.
Serial Number Displays the projector's serial
number.
UCP ports 1 / 2 Reserved for future application.
21 smarttech.com/kb/170548
Notes
Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Always reset the lamp hours after you
replace a lamp, because lamp service
reminders are based on the current hours of
use. See Resetting the lamp hours on
page 27 for details on the lamp hours reset
procedure.
If there is no current video input source
signal, this setting displays the last known
source signal image resolution and refresh
rate.
If you haven't enabled the Network and VGA
Out setting, this setting is unable to display
the projector's network communications
processor firmware version and displays
0.0.0.0 instead.