Telephone Settings Ringing Tone - TIPTEL 192 Operating Instructions Manual

System settings
Loading new software (continued)
In Tipkom, start "start transfer" under item "configuration". Then, select the operating software.
Please be aware that all audio data will be lost.
1. Press the
"settings".
2. Press the
3. Press the
"system".
4. Press the
5. Press the
"new software".
6. Press the
7. Press the
rating software (program) and to start
the loader.
Now, you can load a new operating software via the PC software.
Telephone settings
Ringing tone
The ringing tone can be adjusted individually with regards to volume, melody and speed. You
can assign an individual ringing tone to each entered MSN. If you do not wish to be disturbed by
incoming calls, just deactivate the ringing tone. If you want the volume to increase by each
ringing tone, you can activate the function "incremental volume control".
1. Press the
"settings".
2. Press the
3. Press the
"telephone".
4. Press the
5. Press the
6. Press the
the MSN.
7. Press the
8. Now, enter the desired ringing signal
via a two-digit function code (00 ...99).
9. Press the
the desired volume or the incremental
volume control.
10. Press the
or button to select
button.
or button to select
button.
or button to select
button.
button to delete the ope-
or button to select
button.
or button to select
button.
button.
or button to select
button.
or button to select
button.
Every time you press the button, the display
switches between the available functions.
The display shows "appointment" or "answe-
ring machine".
The display shows "system".
The display shows "ISDN".
The display shows "load new software".
The display shows "Attention, program is
being deleted" and after some seconds "start
loader?".
After some seconds, the display shows
"Loader V1.2".
Every time you press the button, the display
switches between the available functions.
The display shows "telephone".
The display shows "ringing tone".
The display shows "MSN 1" and the selected
ringing tone melody.
The MSN is shown in the display.
The ringing signal is being heard for verifica-
tion of the setting.
The display shows the entry. The new melo-
dy is heard.
The display switches between "ringing tone
OFF", the volume
"incremental volume control ON".
The setting is stored.
37
indicator bar and