Settings; Programmable Parameters - TIPTEL 308 clip Operating Instructions Manual

Settings

Programmable parameters

Language ............................... German, English, French, Italian or Dutch.
Time ........................................ Here, you can set the time.
Date ........................................ Here, you can set the date (day, month, year).
Voice-day-and-time-stamp ... On or Off. If you select "on", the day and time belon-
Network time ......................... On or Off. If your telephone network or your PABX
Length of incoming ...............
messages
Recording quality .................. Level 1 or 2, whereas level 2 has the highest record-
Ringing tones ........................ 2 to 9 ringing tones. This is to set the number of
Remote control code ............ The remote control code consists of 1 to 4 digits
Remote pre-interrogation ..... Yes or no. If you selected "yes", and new incoming
Settings
ging to the ICM are indicated at the end of the mes-
sage.
transmits the time, it can be adopted by the internal
clock (the year is not transmitted and has to be set
manually).
1 to 5 minutes or endless. Here, you can limit the
time a caller has at his disposal to speak a message.
ing quality. An increasing recording quality means a
decrease of available recording time. Level 1 corres-
ponds to about 30 minutes and level 2 about 15
minutes recording time.
ringing tones until the answering machine picks up.
ranging from 0 to 9999. The code "–" is used to
deactivate the remote control.
messages exist, your tiptel 308 clip will pick up after
2 ringing tones (regardless of your settings for the
number of ringing tones). If no new incoming
messages exist, the device picks up after the number
of ringing tones according to your settings. Thus, you
can identify whether new messages have been
recorded or not and whether a remote interrogation
needs to be performed or not.
10