2-Line Operation With Hold; Three-Party Conference; Call Transfer - TIPTEL 192 Operating Instructions Manual

Telephone calls

2-line operation with hold

The function "2-line operation with hold" allows you to switch between an active connection and
a call placed on hold.
1. Press the
R

Three-party conference

(This feature must be released by your local telephone network provider.)
If you intend to establish a call with two parties at the same time, you need to establish an active
call and place one caller on hold.
1. Call subscriber 1 and place the call on
hold.
2. Call subscriber 2.
3. Press the
the function "2-line operation with
hold".
4. Press the
To end the 2-line conversation with hold:
5. Press the
the function "end 2-line operation with
hold".
6. Press the
Call transfer (only for telephone system operation)
You receive an incoming call and want to transfer it to another extension (see also chapter
"Settings/call transfer).
You want to transfer an incoming call:
1. Press the
R
2. Dial the telephone number to which
the call shall be transferred.
3. Replace the handset.
button.
or button to select
button.
or button to select
button.
button.
The active call is placed on hold and the call
placed on hold is activated.
Every time you press the button, the display
switches between the available functions.
Now, you can hold a conference call with both
parties.
Every time you press the button, the display
switches between the available functions.
The conference call is stopped. One of the
called parties is placed on hold and the other
one remains active.
The call is being placed on hold. You hear the
dialling tone.
A new connection is being established.
The incoming call is transferred to the dialled
extension number.
19