Automatic Call-Back On Busy (Ccbs); Edit Call-Back List - TIPTEL 192 Operating Instructions Manual

Telephone calls

Automatic call-back on busy (CCBS)

Should the desired target subscriber's line be busy, the display shows a selection field for auto-
matic redialling and the automatic call-back function, i. e. the function completion of call to busy
subscriber. This special feature needs to be released by your telephone network provider. This
is not only valid for your installation, but also for the target subscriber's installation. Just replace
the handset if you do not wish to use this function. The corresponding menu line is only shown
in the display if the CCBS feature is available.
1. Press the
select the "call-back" function.
2. Press the
handset.
3. Wait for signal tone.
4. Pick up the handset.

Edit call-back list

You have activated different call-back requests (6 as a maximum) and now intend to erase some
of those.
In the idle state:
1. Press the
select the "call-back" function.
2. Press the
3. Press the
4. Press the
or
4. Interrupt the transaction by pressing
.
Stop
subscriber busy
call-back
or button in order to
button and replace the
021024280
call-back - delete?
or button in order to
button.
or button.
button
Every time you press the button, the display
switches between the available functions.
The display resumes the normal state. The
call-back request is stored in the call-back
list.
As soon as the target subscriber's line is free
again, a signal tone is heard.
After picking up the handset, you hear a rin-
ging tone and the target subscriber's telepho-
ne rings.
Every time you press the button, the display
switches between the available functions.
The call-back list is displayed.
These buttons allow to browse through the
call-back list until you found the desired tele-
phone number or name.
The entry is erased from the call-back list.
15