Remote Control Functions - TIPTEL 192 Operating Instructions Manual

Remote control (only tiptel 193)
Remote control functions (continued)
Button Function
Remaining recording
3
capacity
4 Message transfer on/off
Change telephone
5
number
+ tel. no.
Date/time
6
Erase all incoming
7
messages
Activation of the call
8
forwarding function
Change telephone
9
number
+ tel. no.
Deactivate answering
0
mode
Stop remote
#
interrogation
Functions during play-back
1
2
3
4
6
5
8
Remark/operation
The remaining recording capacity is informed by a voice
message.
You can switch the message transfer on or off.
Allows to change the target telephone number for the mes-
sage transfer function. Dial the new destination number.
The device confirms each number separately. After having
dialled the new target telephone number press #. The
new telephone number is repeated by a corresponding
voice message.
The current time and date are informed by a voice messa-
ge.
The answering machine erases all incoming messages
since the answering mode was activated. This function can
be protected against unintentional execution.
You can switch the call forwarding function for the activa-
ted MSN on or off (see also button functions 4: next
MSN).The call forwarding function is always active. In
order to deactivate it, you have to call another MSN and
switch to the target MSN during the remote operation.
Allows you to change the telephone number for the call for-
warding function remotely. Dial the new target telephone
number. The device confirms each number separately.
After having dialled the complete number press ??? #. The
new telephone number is repeated by voice message.
The device disconnects the line and stops the answering
mode. Further incoming calls will not be answered.
The device disconnects the line but remains in the answe-
ring mode.
Slow play-back speed
Normal play-back speed
Fast play-back speed
Jump to the beginning of the currently played back mes-
sage or to the beginning of the earlier message.
Jump to the beginning of the following message
Repetition of the last few seconds
Stop
57