Storing Data - TIPTEL 192 Operating Instructions Manual

Electronic telephone book

Storing data

An entry in the electronic telephone book consists of the name (= search criterion), the telepho-
ne number and additional settings if required (e. g. filter function, cost counter).
1. Press the
2. Press the
3. Enter the name via the numeric key-
pad.
4. Press the
5. Enter the telephone number via the
numeric keypad.
6. Press the
7. Press the
8. Press the
9. Press the
10. Press the
11. Press the
button.
button.
button.
button.
or button.
button.
or button.
button.
button.
The display shows "new entry".
The display shows "name".
Your entry is displayed. The character ente-
red last can be erased by pressing the
button.
The name is now entered. The display shows
"number:".
The display shows your entry.
The telephone number entry is complete. The
display shows "cost counter off". If you do not
wish to take out further settings, just press
the STOP button. You are then lead to the
end of the entry options automatically (conti-
nue as of point 10).
Every time you press the button, the display
switches between:
off: The cost counter is deactivated and
erased.
on: The cost counter is activated. The tele-
phone charges relating to the entry in
question are accumulated and upda-
ted after each call.
The display shows "filter off".
Every time you press the button, the display
switches between:
Filter off: No active filter.
VIP filter: An incoming call from this number
is indicated by a ringing signal
even if the ringing signal had
been turned off.
Call filter: Incoming calls are not indicated
by a ringing signal.
Call deflection (CD) filter: The caller is
being transferred to the pre-
programmed extension (see
chapter "call deflection".
The display shows "store entry?"
The entry is stored.
26