Type Label; Indicator Light; Blue Operating Concept - Meiko M-iClean H Series Operating Instructions Manual

4.3
4.4
4.5
9750359

Type label

The rating plate on the M-iClean H is located on the left or right-hand side in the
lower rear section of the machine. Further rating plates are located on the switch
cabinet behind the front panel and on the display.
The following information can be found on the
M-iClean H's rating plate:
1 Name and address of manufacturer
2 Machine type
3 Model name
4 Serial number
5 Electrical connection variant (marked
6 Change date (if required)
7 Voltage
8 Frequency
9 Rated power
10Rated current
11IP protection rating
12Year of manufacture
13CE mark
14IP protection rating
Notice
The M-iClean H can be connected to the power provided a power supply is locally
available. The connection variant currently available is labelled ● under (5). A
(MEIKO authorised) electrician can attach a different connection variant.

Indicator light

The indicator light shows different colours depending on the operating mode.
– Blue:
machine is ready for operation
– Green:
a wash cycle is running
– Red:
there is a status notification

Blue operating concept

The parts of the dishwasher that must be touched by the operator in operation and
in daily use are blue. And so after a short briefing, operators know intuitively that
they have to remove and clean the wash system, tank cover sieve and filter, for ex-
ample.
16 / 62
●
)