Setting Serial Communications Parameters; Setting The Baud Rate; Setting The Parity Bit - ENCAD CADJET 3D User Manual

Setting serial communications parameters

If your software or hardware platform only has serial communication capability, check
the manuals provided with your system for the required communication parameters prior
to setting the RS-422/232 options on the printer.

Setting the baud rate

Baud rate is the data transmission rate (in bits per second) between your computer and
the printer. The Serial Communications menu lets you select from the following baud
rates: 9600, 19200, 38400.
Á
To set the baud rate
1 Select Setup Menu/Serial Communications Menu/Baud Rate.
2 Choose the desired rate.
3 Press OK.

Setting the parity bit

The Serial Communications menu lets you select from the following parity options:
Even, Odd, None
Á
To set the parity bit
1 Select Setup Menu/Serial Communications Menu/Parity Bit.
2 Choose the desired option.
3 Press OK.
CADJET
Serial communications and cabling
® 3D User Guide
B-2