Table of Contents
Advertisement
Á
To turn off Save Media
1 Press Setup Menu/Paper Option Menu/Save Media.
2 Choose Off.
3 Press OK.
Auto-Wipe
The cartridge jet plates are periodically wiped during printing. The default for this func-
tion is OFF.
Á
To turn on the wiper
1 Press Setup Menu/Paper Option Menu/Auto-Wipe.
2 Choose On.
3 Press OK.
Defining user setup
You can save the options you use most frequently so you don't have to reconfigure the
printer each time you print an image. You can define up to eight different combinations
of options and save them with a user number ranging from 1-8. Select the user number
you want to use before sending an image to the printer. If your printer driver has host-
controlled settings, the user setup may be overridden. If possible, disable the driver
control settings.
You can save settings for the following options:
• Cut On or Off
• Media Standard • Color Mode
• Drying Time
• Baud Rate
• Auto-Wipe On or Off
• Parity
• Quality Mode
CADJET
• Save Media On or Off
• Normal or Expanded Margins
Printer Options 2-12
®
3D User Guide
Advertisement
Table of Contents
