Palette Select; Control - ENCAD CADJET 3D User Manual

l

Palette Select

l

Control

l
Rotation
l
Ink Reduction
Palette select
Palette select lets you choose either the HP-GL/2 or AutoCAD palette. Both palettes
allow 256 active colors with eight colors predefined. The predefined colors for each
palette are shown in the following table.
Pen 0
Pen 1
Pen 2
Pen 3
Pen 4
Pen 5
Pen 6
Pen 7
Á
To choose a palette type
Press Setup Menu/HP-GL/2 menu/Palette Select.
1
Choose either AutoCAD or HP-GL/2.
2
Press OK.
3
Control
Control determines whether certain printing parameters are set in the software applica-
tion or overridden by the printer's front panel. Control overrides the following parameters
of the HP-GL/2 header file: repeat plot (RP) and enable auto cutter (EC).
Repeat Plot: With Control set to Printer, the printer will ignore RP commands in the
plot file and only print one plot. From the printer's front panel you can specify additional
copies using the Reprints menu.
Nesting Menu
HP-GL/2 AutoCAD
White White
Black Red
Red Yellow
Green Green
Yellow Cyan
Blue Blue
Magenta Magenta
Cyan Black
l
l
Reprints
l
Ink Limit
l
Exit
®
CADJET 3D User Guide
HP-GL/2 4-2