Adi Driver; Stopping Printing - ENCAD CADJET 3D User Manual

Wide format inkjet printer
Hide thumbs Also See for CADJET 3D:
Table of Contents

Advertisement

a.
In AutoCAD use APPLOAD or the ARX command to load the acpltstamp.arx
(located in default AutoCAD 2000 folder i.e., C:\Program Files\ACAD2000\).
b.
The command to set up the Plot stamp is PLOTSTAMP. There is also a
scriptable -PLOTSTAMP.
Note: After loading, it will be persistent in all future launches of AutoCAD unless you
unload it explicitly with the APPLOAD or the ARX command.

ADI Driver

The ENCAD ADI Driver lets you print to ENCAD printers from AutoCAD. Use it to
print files created with AutoCAD DOS and Windows Releases 12, 13, 14, and 1 5. This
Driver uses the HP-RTL command language to send data to the printer. For details on its
installation and use, refer to the user guide provided on the CD-ROM.
Á
To print from the ADI Driver:
1 Open a drawing into AutoCAD's drawing editor. Select the printer icon, print or
plot from the FILES menu, or enter plot at AutoCAD's Command prompt to
print a drawing.
2 AutoCAD will display a plot configuration dialog box. Make the selections
necessary to specify your drawing. If the ENCAD driver does not appear as
the name at the top of the dialog box, click the Device and Default Selection
button, click on the ENCAD driver, and click OK.
3 From the Plot Configuration box, click the Pen Assignments button to set
pens for each color in your AutoCAD drawing. See the discussion on colors
and printer pens below.
4 After all settings are to your satisfaction, choose OK to start the printing
process.

Stopping Printing

To stop the printing process while AutoCAD is sending data to the printer, abort by
typing: Ctrl-C in DOS Releases 12, 13; and Escape key in Windows Releases 12, 13, 14.
Spooling
The driver uses AutoCAD dispatcher functions for all communication with the printer. As
a result, the driver supports the use of an optional separate spooler. The use and configu-
ration of a spooler is described in your AutoCAD Installation and Performance Guide.
See also the section below on AutoCAD's Autospool facility.
®
CADJET
3D User Guide
Printing 3-6

Advertisement

Table of Contents
loading

Table of Contents