Table of Contents
Advertisement
Hardware Version - This displays the current hardware version. The hardware
version of the upgrade file must accord with the Router's current hardware version.
To upgrade the router's firmware, follow these instructions below:
Step 1: Download a more recent firmware upgrade file from the SMC website
(www.smcnetworks.com.tw)
Step 2: Type the path and file name of the update file into the "File" field. Or click the
Browse button to locate the update file.
Step 3: Click the Upgrade button.
Note:
5)
New firmware versions are posted at www.smcnetworks.com.tw and can be
downloaded for free. If the router is not experiencing difficulties, there is no need
to download a more recent firmware version, unless the version has a new
feature that you want to use.
6)
When you upgrade the router's firmware, you may lose its current configurations,
so please back up the router's current settings before you upgrade its firmware.
7)
Do not turn off the router or press the Reset button while the firmware is being
upgraded.
8)
The router will reboot after the upgrading has been finished.
4.11.3 Factory Defaults
Choose menu "System Tools→Factory Defaults", you can restore the configurations of
the Router to factory defaults on the screen (shown in Figure 4-50).
Click the Restore button to reset all configuration settings to their default values.
Note:
1)
The default User Name is admin.
2)
The default Password is smcadmin.
3)
The default IP Address is 192.168.2.1.
4)
The default Subnet Mask is 255.255.255.0.
5)
All settings you have saved will be lost when the default settings are restored.
SMCBR14
Cable/DSL Router User Guide
Figure 4-50
55
Advertisement
Table of Contents
