SMC Networks 7904WBRAS-N User Manual
  1. Manuals
  2. Brands
  3. SMC Networks Manuals
  4. Wireless Router
  5. 7904WBRAS-N
  6. User manual

SMC Networks 7904WBRAS-N User Manual

Adsl2/2+ barricade n 150mbps wireless router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER GUIDE
SMC7904WBRAS-N

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7904WBRAS-N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SMC Networks 7904WBRAS-N

Summary of Contents for SMC Networks 7904WBRAS-N

  • Page 1 USER GUIDE SMC7904WBRAS-N...
  • Page 2 SMC Networks, Inc. 20 Mason Irvine, CA 92618 All rights reserved. Trademarks: SMC is a registered trademark; and Barricade is a trademark of SMC Networks, Inc. Other product and company names are trademarks or registered trademarks of their respective holders.
  • Page 3 Warranty and Product Registration To register SMC products and to review the detailed warranty statement, please refer to the Support Section of the SMC Website at http://www.smc.com SMC Networks, Inc. 20 Mason Irvine, CA 92618...
  • Page 4 This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter... Countries of Operation & Conditions of Use in the European Community SMC contact for these products in Europe is: SMC Networks Spain, S.L. Edificio Conata II, Fructuos Gelabert 6-8 2º,2ª...
  • Page 5 The official CE certificate of conformity can be downloaded by selecting the relevant model/ part number from www.smc.com -> support -> download" Declaration of Conformity in Languages of the European Community Společnost SMC Networks tímto prohlašuje, že toto rádiové [Czech] zařízení LAN je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
  • Page 6 EC-Declaration of Conformity can be found under the corresponding product section on the web http://www.smc.com. Por medio de la presente SMC Networks declara que el Radio [Spanish] LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
  • Page 7 Dyrektywy 1999/5/EC. Oficjalna Deklaracja zgodności UE znajduje się w odpowiedniej sekcji produktu w witrynie http://www.smc.com. A SMC Networks declara que este dispositivo de LAN de [Portuguese] Rádio está em conformidade com os requisitos essenciais e com outras provisões relevantes da Directiva 1999/5/CE. A Declaração de Conformidade CE oficial encontra-se na secção...
  • Page 8 1999/5/EG. Den officiella EG-försäkran om överensstämmelse finns under motsvarande produktavsnitt på http://www.smc.com. Hér með lýsir SMC Networks því yfir að þessi Radio LAN [Icelandic] búnaður er í samræmi við grunnkröfur og aðrar viðeigandi kröfur, sem gerðar eru í tilskipun 1999/5/EB. Opinberu EB-samræmisyfirlýsinguna er að...
  • Page 9 Por favor contacte la autoridad reguladora local o SMC Networks para más detalles en relación con las restricciones actuales para uso exterior. Dieses Wireless LAN Gerät arbeitet im 2.4 GHz Frequenzband [German] und ist für den Einsatz im Innenbereich in den benachrichtigten...
  • Page 10 Portogallo, Regno Unito, Spagna, Svezia, Svizzera. In alcuni Paesi si applicano i requisiti per il funzionamento in esterni, quali requisiti di licenza e canali consentiti. Contattare l'Autorità normativa locale del proprio Paese o SMC Networks per informazioni dettagliate sulle limitazioni correnti per l'utilizzo in esterni.
  • Page 11 Portugāle, Grieķija, Īrija, Islande. Dažās valstīs ir spēkā ierobežojumi lietošanai ārvidē, piemēram, licences prasības un darbībai atļautie kanāli. Lūdzu, sazinieties ar vietējo regulējošo instanci vai SMC Network, lai saņemtu informāciju par pašreizējiem ierobežojumiem lietošanai ārvidē. Šis įrenginys yra 2,4 GHz belaidis LAN siųstuvas-imtuvas, [Lithuanian] skirtas naudoti patalpose namie ar biure visose notifikuotose EB ir ELPA šalyse narėse.
  • Page 12 Szczegółowe informacje na temat obowiązujących ograniczeń użytkowania zewnętrznego można uzyskać, kontaktując się z lokalnym urzędem regulacji lub firmą SMC Networks. Este dispositivo é um transreceptor de LAN sem fios de 2,4 [Portuguese] GHz, destinado a uma utilização interior em casa e no escritório, em todos os Estados membros notificados da CE e da...
  • Page 13 Noregur, Spánn, Svíþjóð, Sviss, Bretland, Portúgal, Grikkland, Írland, Ísland. Kröfur fyrir notkun utanhúss, svo sem kröfur um leyfi og heimilaðar rásir eiga við í sumum löndum. Hafið samband við reglugerðaryfirvöld á hverjum stað eða SMC Networks til að fá upplýsingar um gildandi takmarkanir á notkun utanhúss.
  • Page 14 Safety Compliance Underwriters Laboratories Compliance Statement Important! Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the followings: Operating Voltage Cord Set Specifications UL Listed/CSA certified Cord Set Minimum 18AWG 120Volts Type SVT or SJT three conductor cord Maximum length of 15 feet...

  • Page 15: Table Of Contents

    Contents Introduction ................................1 Packing List............................. 1 Safety Precautions ........................... 1 LED and Interfaces..........................2 System Requirements ..........................3 Features ..............................3 Hardware Installation .............................. 5 About the Web Configuration..........................7 How to Access the Router ........................7 Setup Wizard ............................8 3.2.1 Internet Setup ..........................
  • Page 16 3.5.2 Wireless Clients..........................65 3.5.3 DHCP Clients ..........................65 3.5.4 Logs ............................... 66 3.5.5 Statistics............................66 3.5.6 Route information.......................... 67 3.5.7 Logout ............................67 Appendix A ................................... 68 Appendix B ................................... 69...

  • Page 17: Introduction

    1 Introduction The SMC7904WBRS-N supports multiple line modes. It provides four 10/100 base-T Ethernet interfaces at the user end. The device provides high-speed ADSL broadband connection to the Internet or Intranet for high-end users, such as net bars and office users. The device provides high performance access to the Internet, downlink up to 24 Mbps and uplink up to 1 Mbps.

  • Page 18: Led And Interfaces

    1.3 LED and Interfaces Front Panel The following table describes the LEDs of the device: Indicator Color Status Description The device is started successfully. Power Blue The device is powered off. LAN connection is established and activated. LAN data is being transmitted, or Internet data is being transmitted in LAN1-4 Blue Blinks...

  • Page 19: System Requirements

    The following table describes the interfaces of the device: Interface Function RJ-11 interface, for connecting to the ADSL interface or a splitter through a telephone cable. Wireless Button to enable or disable WLAN. Restore to factory defaults. To restore factory defaults, keep the device powered on, and push RESET a paper clip into the hole to press the button for over 3 seconds and then release.
  • Page 20 NAT and NAPT Static route Firmware upgrade: Web, TFTP, and FTP Reset to factory defaults through the Reset button or Web DNS relay Virtual server Port Forwarding Web interface Telnet CLI System status display PPP session PAP and CHAP IP filter IP QoS Remote access control Line connection status test...

  • Page 21: Hardware Installation

    2 Hardware Installation Step 1 Connect the DSL interface of the device to the MODEM interface of the splitter through a telephone cable. Connect the phone to the PHONE interface of the splitter through a telephone cable. Connect the incoming line to the LINE interface of the splitter. The splitter has three interfaces: LINE: Connect to a wall phone jack (RJ-11 jack).
  • Page 22 Connection 2 Figure 2 displays the connection when the splitter is installed close to the router. Figure 2 Connection diagram (Connecting a telephone set before the splitter) Note: When connection 2 is used, the filter must be installed close to the telephone cable. See Figure2. Do not use the splitter to replace the filter.

  • Page 23: About The Web Configuration

    3 About the Web Configuration This chapter describes how to configure the router by using the Web-based configuration utility. 3.1 How to Access the Router The following is the detailed description of accessing the router for the first time. Step 1 Open the Internet Explorer (IE) browser and enter http://192.168.2.1. Step 2 In the Login page that is displayed, enter the username and password.

  • Page 24: Setup Wizard

    Caution: If the device is not in use, please power off the device. 3.2 Setup Wizard Setup Wizard helps you to fast and accurately configure Internet connection and other important parameters. The following sections describe these various configuration parameters. When subscribing to a broadband service, be aware of the Internect connection mode. The physical WAN device can be Ethernet, DSL, or both.
  • Page 25 Step 1 Choose Setup > Wizard. The page as shown in the following figure appears: Step 2 Click Setup Wizard. The page as shown in the following figure appears: There are four steps to configure the device. Click Next to continue.
  • Page 26 Step 3 Set the time and date. Then, click Next. Step 4 Configure the Internet connection. Select the protocol and the encapsulation mode. Set the VPI and the VCI. If the Protocol is set to PPPoE or PPPoA, the page as shown in the following figure appears:...
  • Page 27 You need to enter the user name and password provided by your ISP for PPPoE or PPPoA dialup. If the Protocol is set to Dynamic IP, the page as shown in the following figure appears: If the Protocol is set to Static IP, the page as shown in the following figure appears: You need to enter the information of the IP address, subnet mask, and gateway that provided by your ISP.
  • Page 28 If you click Scan, the system automatically searches the available PVCs. After setting, click Next. Step 5 Configure the wireless network. Enter the information and click Next.
  • Page 29 Step 6 View the configuration information of the device. To modify the information, click Back. To effect the configuration, click Apply.

  • Page 30: Internet Setup

    Note: In each step of the Wizard page, you can click Back to review or modify the previous settings or click Cancel to exit the wizard. 3.2.1 Internet Setup Choose Setup > Internet Setup. The page as shown in the following figure appears:...
  • Page 31 In this page, you can configure the WAN interface of the device. Click Add and the page as shown in the following figure appears: The following table describes the parameters in this page. Field Description ATM PVC CONFIGURATION Virtual Path Identifier (VPI) is the virtual path between two points in an ATM network. Its value range is from 0 to 255.
  • Page 32 Field Description Encapsulation Mode Select LLC or VCMUX from the drop-down list. Usually, you can select LLC. If you enter a value, packets from the interface is tagged with the set 802.1q VLAN ID. Its 802.1Q VLAN ID value range is 0-4094, while 0 indicates to disable this function. NETWORK ADDRESS TRANSLATION SETTINGS Enable Bridge Service Select or deselect the check box to enable or disable the WAN connection.
  • Page 33 IPoA If you select the IPoA as the connection protocol, the following page appears. After proper configurations, click Apply to take the settings in to effect.

  • Page 34: Wireless Setup

    3.2.2 Wireless Setup This section describes the wireless LAN and some basic configuration. Wireless LANs can be as simple as two computers with wireless LAN cards communicating in a pear-to-pear network or as complex as a number of computers with wireless LAN cards communicating through access points that bridge network traffic to a wired LAN.
  • Page 35 Field Description Select the wireless channel used by the device from the drop-down list. You can select Wireless Channel Auto Scan or a value from the drop-down list. The value is different for different country. Select the 802.11 mode of the device from the drop-down list. The device supports 802.11 Mode 802.11b, 802.11g, 802.11n, 802.11b/g, 802.11n/g, and 802.11b/g/n.
  • Page 36 The following table describes the parameters in this page. Field Description You can select 64 bits or 128 bits from the drop-down list. WEP Key Length If you select 64 bits, you need to enter 10 hexadecimal numbers or 5 characters. If you select 128 bits, you need to enter 26 hexadecimal numbers or 13 characters.
  • Page 37 The following table describes the parameters in this page. Field Description You can select Auto (WPA or WPA2)-PSK or Auto (WPA or WPA2)-Enterprise WPA Mode from the drop-down list. Group Key Update Interval Set the interval for updating the key. Pre-Shared Key Set the preshared key to identify the workstation.
  • Page 38 You need to enter the IP address, port, shared key of the RADIUS server. Click Apply to save the settings. WPA2 Only If the Security Mode is set to WPA2 only, the page as shown in the following figure appears:...
  • Page 39 Parameters in this page are similar to those in the page for Auto (WPA or WPA2). Click Apply to save the settings. WPA Only If the Security Mode is set to WPA only, the page as shown in the following figure appears:...

  • Page 40: Local Network

    Parameters in this page are similar to those in the page for Auto (WPA or WPA2). Click Apply to save the settings. 3.2.3 Local Network You can configure the LAN IP address according to the actual application. The preset IP address is 192.168.1.1. You can use the default settings and DHCP service to manage the IP settings of the private network.
  • Page 41 If you change the IP address of the device, you must also change the range of IP addresses in the pool used for DHCP on the LAN. The IP address pool can contain up to 253 IP addresses. Click Apply to save the settings. In the LOCAL NETWORK page, you can assign LAN IP addresses for specific computers according to their MAC addresses.

  • Page 42: Time And Date

    3.2.4 Time and Date Choose Setup > Time and Date. The TIME AND DATE page as shown in the following figure appears: In the TIME AND DATE page, you can configure, update, and maintain the time of the internal system clock. You can set the time zone that you are in and the network time protocol (NTP) server.

  • Page 43: Advanced Configuration

    3.3 Advanced Configuration This section contains advanced features used for network management, security and administrative tools to manage the device. You can view the status and other information of the device, to examine the performance and troubleshoot. 3.3.1 Advanced Wireless This function is used to modify the standard 802.11g wireless settings.
  • Page 44 3.3.1.1 Advanced Settings In the ADVANCED WIRELESS page, click Advanced Settings. The page as shown in the following figure appears:...
  • Page 45 The following table describes the parameters in this page. Field Description ADVANCED WIRELESS SETTINGS Transmission Rate Select the transmission rate of the wireless network from the drop-down list. Select the multicast transmission rate of the wireless network from the drop-down list. Multicast Rate You can select Lower or Higher.
  • Page 46 3.3.1.2 MAC Filtering In the ADVANCED WIRELESS page, click MAC Filtering. The page as shown in the following figure appears: Click Add and the page as shown in the following figure appears: The following table describes the parameters in this page. Field Description User Name...
  • Page 47 3.3.1.3 Security Settings In the ADVANCED WIRELESS page, click Security Settings. The page as shown in the following figure appears: Select the desired SSID from the drop-down list. Select the encryption type from the Security Mode drop-down list. You can select None, WEP, AUTO (WPA or WPA2), WPA Only, or WPA2 Only.

  • Page 48: Port Forwarding

    Note: Ensure that the network card supports the WPS function. You can use one of the following there methods to use WPS authentication: Press the WPS button on the side panel for 3 seconds. In the WIRELESS WPS page, click PBC. It has the same function of the WPS button on the side panel. This is an optional method on wireless clients.

  • Page 49: Dmz

    Select a service for a preset application or enter the name in the Custom Server field. Enter an IP address in the Server IP Address field, to appoint the corresponding PC to receive forwarded packets. The port table displays the ports that you want to open on the device. The Protocol indicates the type of protocol used by each port.

  • Page 50: Parental Control

    In this page, you can enable a DMZ host. In this way, access from Internet to the WAN IP address of the device is forwarded to the DMZ host and network server of the internal LAN is protected. Click Apply to save the settings. 3.3.4 Parental Control Choose Advanced >...
  • Page 51 Enter the website in the URL field. Select the time to block websites from the Schedule drop-down list, or select Manual Schedule and set the corresponding time and days. Click Apply to add the website to the BLOCK WEBSITE table. 3.3.4.2 Block MAC Address In the PARENTAL CONTROL page, click Block MAC Address.

  • Page 52: Filtering Options

    The following table describes the parameters in this page. Field Description User Name Enter the name that identifies your configuration. For example, kids. Current PC’s MAC Address Enter the MAC address of the computer that connects to the device. Other MAC Address Enter the MAC address of another device that is included in MAC filtering.
  • Page 53 3.3.5.1 Inbound IP Filtering In the FILTERING OPTIONS page, click Inbound IP Filtering. The INCOMING IP FILTERING page as shown in the following figure appears: Click Add to add an inbound IP filter. The page as shown in the following figure appears: Enter the Filter Name and specify at least one of the following criteria: protocol, source/destination IP address, subnet mask, and source/destination port.
  • Page 54 3.3.5.2 Outbound IP Filtering By default, all outgoing IP traffic from the LAN is allowed. The outbound filter allows you to create a filter rule to block outgoing IP traffic by specifying a filter name and at least one criterion. In the FILTERING OPTIONS page, click Outbound IP Filtering.
  • Page 55 3.3.5.3 Bridge Filtering In the FILTERING OPTIONS page, click Bridge Filtering. The page as shown in the following figure appears: This page is used to configure bridge parameters. In this page, you can modify the settings or view the information of the bridge and its attached ports.

  • Page 56: Qos Config

    3.3.6 QoS Config Choose Advanced > QoS Config. The page as shown in the following figure appears: 3.3.6.1 Interface Configuration In the QoS CONFIG page, click QoS Interface Config. The page as shown in the following figure appears: Click Edit and the page as shown in the following figure appears: In this page, you can configure the uplink bandwidth and downlink bandwidth of each interface.
  • Page 57 3.3.6.2 Queue Configuration In the QoS CONFIG page, click QoS Queue Config. The page as shown in the following figure appears: In this page, you can configure the priority of the queue. The device supports the following three priority levels: high, medium, low.
  • Page 58 The following table describes the parameters in this page. Field Description Traffic Class Name Enter the name of the traffic class. Enable Classification Select or deselect the check box to enable or disable QoS classification. SPECIFY TRAFFIC CLASSIFICATION RULES Select L1&L2 or L3&L4 from the drop-down list. Classification Type L1&L2 maps to the features of layer 1 and layer 2, such as the MAC address.

  • Page 59: Firewall Settings

    Field Description configuration. Mark DSCP Attach the DSCP mark to the mapped packet. Mark 802.1p Priority Attach the 802.1p mark to the mapped packet. Click Apply to save the settings. 3.3.7 Firewall Settings A denial-of-service (DoS) attack is one of the most common network attacks and is characterized by an explicit attempt by attackers to prevent legitimate users of a service from using that service.

  • Page 60: Dynamic Dns

    The following table describes the parameters in this page. Field Description Obtain server address If you select this radio button, the device automatically obtains IP address of the DNS automatically server from the ISP. You need not manually enter the IP address of the server. Use the following DNS server If you select this radio button, you need to manually enter the IP address of the server addresses...

  • Page 61: Network Tools

    Click Add to add dynamic DNS. The page as shown in the following figure appears: The following table describes the parameters in this page. Field Description Select the DDNS provider from the drop-down list. You can select DynDns.org, TZO, or DDNS provider GnuDIP.
  • Page 63 This page contains the following function items: port mapping, IGMP proxy, IGMP snooping, , UPnP, ADSL, SNMP, TR-069, certificates and pptpd. 3.3.10.1 Port Mapping In the NETWORK TOOLS page, click Port Mapping. The page as shown in the following figure appears: In this page, you can bind the WAN interface and the LAN interface to the same group.
  • Page 64 3.3.10.2 IGMP Proxy In the NETWORK TOOLS page, click IGMP Proxy. The page as shown in the following figure appears: IGMP proxy enables the device to issue IGMP host messages on behalf of hosts that the system discovered through standard IGMP interfaces. The device serves as a proxy for its hosts after you enable the function. Select Enable IGMP Proxy and select the desired WAN and corresponding LAN interface.
  • Page 65 In this page, you can enable universal plug and play (UPnP) and then the system serves as a daemon. UPnP is widely applied in audio and video software. It automatically searches devices in the network. If you are concerned about UPnP security, you can disable it. Select the WAN and LAN interfaces at which you want to enable UPnP and click Apply to save the settings.
  • Page 66 Field Description Enable SNMP Agent Select or deselect the check box to enable or disable SNMP agent. Universal character to obtain the device information. It is similar to the password. The Read Community SNMP application entity can use it to directly obtain the device information. Universal character to modify the device configuration.
  • Page 67 Field Description Authentication function, you need to enter the user name and password for authentication. Connection Request User Name The user name that the TR069 server uses to access the TR069 progress of the device. Connection Request Password The password that the TR069 server uses to access the TR069 progress of the device. Click Apply to save settings.
  • Page 68 3.3.10.9 PPTPD The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks. PPTP uses a control channel over TCP and a GRE tunnel operating to encapsulate PPP packets. In the NETWORK TOOLS page, click PPTPD. The page as shown in the following figure appears.
  • Page 69 The following table describes the parameters in this page. Field Description Local IP Start The started IP address of the local network. The valid numbers of local IP addresses. It works together with the Local IP Start to Local IP Num determine the range of the local IP addresses.

  • Page 70: Routing

    3.3.11 Routing Choose Advanced > Routing. The page as shown in the following page appears: This page contains the following function items: static route, default gateway, and RIP settings. 3.3.11.1 Static Route Choose Advanced > Routing and click Static Route. The page as shown in the following figure appears: This page displays the information of existing static routes.
  • Page 71 Field Description Destination Network Address The destination IP address of the device. Subnet Mask The subnet masks of the destination IP address. Use Gateway IP Address The gateway IP address of the device. Use Interface Select the interface of the static routing used by the device from the drop-down list. Note: You can enter the gateway IP address of the device in the Use Gateway IP Address field or set the User Interface, but cannot apply the two settings at the same time.

  • Page 72: Schedules

    If you enable RIP, the device communicates with other devices using the routing information protocol (RIP). Click Apply to save the settings. 3.3.12 Schedules Choose Advanced > Schedules. The page as shown in the following figure appears: Click Add to add a schedule rule. The page as shown in the following figure appears: The following table describes the parameters in this page.

  • Page 73: Logout

    3.3.13 Logout Choose Advanced > Logout. The page as shown in the following figure appears: Click Logout to log out of the configuration page. 3.4 Management 3.4.1 System Choose Management > System Management. The System page as shown in the following figure appears:...
  • Page 74 In this page, you can restart the device, back up the current settings to a file, update the backup file, and restore the factory default settings. The following table describes the buttons in this page. Button Description Reboot Restart the device. Specify the path to back up the current configuration in a configuration file on your Backup Setting computer.

  • Page 75: Firmware Update

    3.4.2 Firmware Update Choose Management > Firmware Update. The page as shown in the following figure appears: In this page, you can upgrade the firmware of the device. To update the firmware, do as follows: Step 4 Click Browse…to select the file. Step 5 Click Update Firmware to update the configuration file.
  • Page 76 This page contains Account Password, Services, and IP Address. 3.4.3.1 Account Password In the ACCESS CONTROLS page, click Account Password. The page as shown in the following figure appears: In this page, you can change the password and set the time for automatic logout. You are recommended to change the default password to ensure the security of your network.
  • Page 77 3.4.3.2 Services In the ACCESS CONTROLS page, click Services. The page as shown in the following figure appears: In this page, you can enable or disable the services that are used by the remote host. For example, if telnet service is enabled at port 23, the remote host can access the device by telnet through port 23.

  • Page 78: Diagnostics

    If you enable ACL, ensure that the IP address of the host is in the ACL list. Click Add. The page as shown in the following figure appears: Enter the IP address of the desired device in the IP Address field and click Apply to apply the settings. 3.4.4 Diagnostics Choose Management >...

  • Page 79: Logout

    If you select Remote or Both, enter the IP address and port number of the server. Step 3 Click Apply to apply the settings. Step 4 Click View System Log to view the detail information of the system log. 3.4.6 Logout Choose Management >...

  • Page 80: Device Information

    3.5.1 Device Information Choose Status > Device Info. The page as shown in the following figure appears: The page displays the summary of the device status, including the system information, WAN connection information, wireless information, and local network information.

  • Page 81: Wireless Clients

    3.5.2 Wireless Clients Choose Status > Wireless Clients. The page as shown in the following page appears: The page displays authenticated wireless stations and their statuses. 3.5.3 DHCP Clients Choose Status > DHCP Clients. The page as shown in the following page appears: This page displays all client devices that obtain IP addresses from the device.

  • Page 82: Logs

    3.5.4 Logs Choose Status > Logs. The page as shown in the following figure appears: This page displays the system log. Click Refresh to refresh the system log shown in the box. 3.5.5 Statistics Choose Status > Statistics. The page as shown in the following figure appears:...

  • Page 83: Route Information

    This page displays the statistics information of the network and data transmission. The information helps technicians to identify whether the device is functioning properly. The information does not affect the functions of the device. 3.5.6 Route information Choose Status > Route Info. The page as shown in the following figure appears: The table displays destination routes commonly accessed by the network.

  • Page 84: Appendix A

    Appendix A Technical Specifications Hardware Interface -1 x RJ-11 WAN Port -4 x RJ-45 Fast Ethernet LAN Ports - Button: WPS, Wireless, Reset and Power - 1 external 2dBi antennas ADSL Standard -ITU G.992.1 (G.dmt) -ITU G.992.2 (G.lite) -ITU G.994.1 (G.hs) -ITU G.992.3 (ADSL2) -ITU G.992.5 (ADSL2+) -Annex L (reach extended ADSL2)

  • Page 85: Appendix B

    Appendix B GPL Announcement GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
  • Page 86 The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
  • Page 87 These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, does not apply to those sections when you distribute them as separate works.
  • Page 88 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.
  • Page 89 limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
  • Page 90 REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED...
  • Page 91 The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer"...
  • Page 92 SMC7904WBRAS-N...

This manual is also suitable for:

Smc7904wbras-n

Table of Contents