SMC Networks SMCBR14 WIRED BARRICADE User Manual page 15

broadband service successfully. If there is any problem, please contact with your ISP for
help. After that, please install the router according to the following steps. Don't forget to
pull out the power plug and keep your hands dry.
Step 1: Locate an optimum location for the Router. The best place is usually near the
center of the area in which your PC will be wirelessly connected. The place had
better accord with the
Step 2: Connect the PC(s) and Switch/Hub in your LAN to the LAN Ports on the router,
shown in Figure 2-3.
Step 3: Connect the DSL/Cable modem to the WAN port on the router, shown in Figure
2-3.
Step 4: Connect the AC power adapter to the AC power socket on the router, and the
other end into an electrical outlet. The router will start to work automatically.
SMCBR14
Installation Environment Requirements.
Figure 2-3
5
Cable/DSL Router User Guide