EverFocus EMX32 User Manual page 90

6 Status Highlight
7 Live View Window
Menu Bar:
1 2 3
No. Name
1 Live View
2 Camera
3 Alarm
4 Display
5 Network
System
6
Setting
System
7
Information
8 PTZ
Black Circle: Indicates the IP decoder is recording in sub-stream.
White: Indicates the live view is in a normal status.
Orange: Indicates a motion is being detected.
Blue: Indicates disconnect.
Red: Indicates an alarm / event is triggered.
Grey: Indicates the live view is disabled.
Double-click on a camera image to enlarge the current display to
full screen; double-click again to return to the normal view.
4 5 6
Description
Click to display the live view window.
Click to configure the camera settings. Please refer to 6.5 Camera.
Click to configure the alarm / event settings. Please refer to 6.6 Alarm.
Click to configure the display settings for displaying the camera
information on the camera live view. Please refer to 5.3 Display Setting.
Click to configure the network settings. Please refer to 5.4 Network.
Click to configure the IP decoder time / user privilege / IO control / UI
language or upgrading firmware and etc. Please refer to 5.5 System
Setting.
Displays the system information. Please refer to 5.6 System Information.
Click to control the connected PTZ cameras. Please refer to 6.7 PTZ.
7 8
82
EMX32