Miscellaneous - EverFocus EMX32 User Manual

EMX32

5.5.6 Miscellaneous

You can upgrade the latest firmware, restore the factory default settings to the IP decoder,
upload / save the IP decoder configuration settings from / to the USB or change the language
in this setup menu.
Firmware
Current Firmware Version: Shows the current firmware version of the IP decoder.
Upgrade: Click to upgrade the latest firmware. Note you will need to restore the firmware
file to the USB flash device and then connect the USB flash device to the IP decoder.
Configurations
Load Factory Default: Click to restore the IP decoder to factory default settings. The User
Account, Network IP Settings, and Time settings will not be affected.
Load From USB: Click to upload the IP decoder configurations restored in the USB flash
device.
Save To USB: Click to save the IP decoder configurations to the USB flash device.
Language: Choose which language the IP decoder uses.
Allowed Remote Reboot: Check the box to enable restarting the IP decoder via the Network.
70