EverFocus EMX32 User Manual page 69

NTP Update Interval: The frequency that the system automatically updates the time via
the NTP server. Select Daily, Weekly or Monthly.
Daylight Saving: This Auto daylight saving function is used for the system to automatically
set up the daylight saving time but it is currently reserved for the users in the United States.
So, if you want to set up the daylight saving time, please go to Daylight Saving setting page
to manually set up the time (refer to 5.5.2 Daylight Saving).
For the users in United States, if they want to use the Auto daylight saving functions,
please follow the steps below:
1. Select a U.S Time zone (GMT -05:00 ~ GMT -08:00).
2. Enable the NTP.
3. Enter a NTP server IP address in United States.
4. Select Auto in the Daylight Saving drop-down list.
5. Click Save to save the settings.
6. The Daylight Saving setting page (refer to 5.5.2 Daylight Saving) will be grayed out and
automatically set to the correct daylight saving time.
Note: If you need to use the Daylight Saving function, you must set up the Date / Time
first in this page. If you configure the Daylight Saving function first and then set up the
Date / Time setting, the Daylight Saving function will then be disabled.
61
EMX32