EverFocus EMX32 User Manual page 50

To successfully add the IP camera, you need to click the Save button in this page. You can also
configure the detailed settings as follows.
【 Main / Sub Stream Parameter 】 You can separately configure the settings for the Main / Sub
Streams.
Camera Channel: Show the camera channel number.
Normal Frame Rate: Select a frame rate per second (FPS) for continuous recording. The
frame rate is limited by the maximum total recording capacity of the IP decoder as allocated
across all the installed cameras.
Event Frame Rate: S elect a frame rate per second (FPS) for continuous recording. The frame
rate is limited by the maximum total recording capacity of the IP decoder as allocated
across all the installed cameras.
Resolution: Select a desired recording resolution.
Quality: Select an image quality of the camera.
Constant Bit Rate: set up the current Bit Rate of the connected IP camera.
Record Audio: Select to enable or disable the audio recording function.
Save: Click to add the camera and save the current settings.
Cancel: Click to cancel eth settings and return to the previous setting page.
42
EMX32