Alarm I/O - EverFocus EMX32 User Manual

2.2.3 Alarm I/O

The IP decoder provides four alarm inputs and one alarm outputs. Please refer to the table
below for PIN assignment.
Alarm Out Alarm In
COM NC G G 4 3 G G 2 1
Alarm Input
No. Description
1-4 ALM_IN1 -- ALM_IN4
Alarm Input Contacts
This IP decoder provides one alarm input per camera. All inputs are programmable N.O. (Normal
Open) or N.C. (Normal Closed). All settings are programmed in the ALARM / Event menu.
ALMIN
GND
Alarm Input with N.O. contact in idle state
Alarm Output Contacts
The relay output provides either Normally Open or Normally Closed dry contacts.
ALMOUT +
ALMOUT -
ALMIN
GND
Alarm Input with N.C. contact in idle state
ALMOUT +
ALMOUT -
12
No. Description
COM GND
EMX32