EverFocus EMX32 User Manual page 16

2. You just need to use two Washer Head Screws to fix the EMX32 onto the back of the
monitor, and the front panel of the EMX32 has to be facing UPWARD.
Note: VESA mount (50x50 / 75x75 / 100x100 mm): Use the Washer Head Sliver Screws.
VESA mount (200x200 mm): Use the Washer Head Black Screws.
3. If your monitor is to be mounted on the wall, you should attach the EMX32 to the very
right or left side of the monitor and leave the four VESA mounting holes of the monitor
uncovered so that you can screw the monitor on the wall.
8
EMX32