EverFocus EMX32 User Manual page 31

c. Right click the column to configure the setting. Click Apply Changes
apply and save the settings.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your
network settings, please consult your network administrators for configuration
details.
4. To access to the Live View window, double click the IP address of the desired device, the
login window pops up. Type the user ID and password to log in. By default, the user ID is
admin and the password is 11111111.
5. When first connecting to the IP decoder's IP address, the following dialog may appear.
Please check the "Always trust content from this publisher" box and click the Run button
to run the EverFocus Viewer application.
23
EMX32
button to