Speeddial/Xfer - Aastra 6757i User Manual

12. In the "Line" field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 9
13. Click Save Settings.

Speeddial/Xfer

The speed dial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Xfer key
allows a call to be transferred to other recipients blindly or consultatively. The Speeddial/Xfer key combines the Speed Dial
and Xfer key's functionality together allowing the user to transfer calls or use Speed Dial with one key.
Note:
It is recommended that you enable the "Switch UI Focus to Ringing Line" parameter when using the Speeddial/Xfer fea-
ture. For more information about this parameter, see
Speeddial/Xfer Key Requirements and Functionality
The Speeddial/Xfer key has the following capabilities:
• Speeddial/Xfer and Speed Dial
When the phone is in the "Idle" state, pressing the Speeddial/Xfer key causes the phone to go offhook and dial the pre-
defined extension.
• Speeddial/Xfer and Blind Transfer
When the phone is connected to a call, pressing the Speeddial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message "Transfer Failed" displays, and you can reconnect the call (get the call back) by press-
ing the line key again.
• Speeddial/Xfer and Call Forward
When the phone is in the "Ringing" state, pressing the Speeddial/Xfer key forwards the call to the predefined extension.
41-001385-05 REV03 – 07.2014
"Switch UI Focus to Ringing Line"
Line Keys and Softkeys
on page 166.
89