Flash Key - Aastra 6757i User Manual

Line Keys and Softkeys

Flash Key

You can set a key to generate a flash event when it is pressed on the 6757i. You do this by setting the key to "flash". The
IP phone generates flash events only when a call is connected and there is an active RTP stream (for example, when the
call is not on hold).
Configuring a Flash Key
Aastra Web UI
Use the following procedure to configure a Flash key on the 6757i IP Phone. The procedure shows the softkey screen as
an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 10" on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select "Flash".
4. In the "Label" field, enter a label to display on the phone for the key.
Expansion Module Keys
5. Select from "Key 1" through "Key 36" (M670i)
or
Select from "Key 1" through "Key 60" (M675i)
6. In the "Type" field, select "Flash".
7. (M675i) In the "Label" field, enter a label to display on the phone for the key.
8. Click Save Settings.
80
41-001385-05 REV03 – 07.2014