Aastra 6757i User Manual page 188

Additional Features
Note:
• Contact your System Administrator if you require assistance with regards to configuring the Speeddial key with the
Iniitiate Call functionality.
• The Speeddial key type can be utilized for additional functions related to the Executive and Assistant Services fea-
ture that rely on FAC calls (i.e. opting in to an Executive's filtered call pool, opting out of an Executive's filtered call
pool, etc...). Contact your System Administrator for further details.
Configuring the Initiate Call Key on an Assistant's Phone Using the Aastra Web UI
Use the following procedure to configure the Initiate Call Key on an Assistant's phone using the Aastra Web UI:
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
2. Select a key that you want to use as an Initiate Call key.
3. In the "Type" field, select "Speeddial".
4. In the "Label" field, enter a label to apply to this key.
5. In the "Value" field, enter the Initiate Call FAC (e.g. #64)
or
In the "Value" field, enter the Initiate Call FAC, followed by the Executive's Address (e.g. #644052)
or
In the "Value" field, enter the Initiate Call FAC, the Executive's Address, followed by an asterisk, and then the Destination Address
(e.g. #644052*4059)
6. In the "Line" field, select the line for which you want to use the key functionality.
7. Click Save Settings to save your settings.
182
41-001385-05 REV03 – 07.2014