Aastra 6757i User Manual page 100

Line Keys and Softkeys
Configuring a Speeddial/MWI Key
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 10" on the Top keys.
or
3. Select from "Key 1" through "Key 20" on the Bottom keys.
4. In the "Type" field, select Speeddial/MWI from the list of options.
5. In the "Label" field, enter a key label to assign to the Speeddial/MWI key (e.g. Peter).
When messages are pending, the IP phone UI will display an envelope icon, the number of pending messages, and
then the defined label (e.g.
6. In the "Value" field, enter in the call URI and voicemail URI separated by a semi-colon, as per the following syntax:
[call URI];[voicemail URI]. For example, +33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
Notes:
• As the example above illustrates, pauses and DTMF are supported for the call URI.
• Ensure that no spaces are added between the call URI and the voicemail URI when defining the key value.
• If only one URI is provided, the value will be used for the voicemail URI and the call URI will be left as undefined.
7. In the "Line" field, select the line for which you want to use the key functionality.
8. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
9. Select from "Key 1" through "Key 36" (M670i).
or
Select from "Key 1" through "Key 60" (M675i).
10.In the "Type" field, select Speeddial/MWI.
94
).
3 Peter
41-001385-05 REV03 – 07.2014