Speeddial/Xfer; Sprecode Key - Aastra 6735i User Manual

4. Press an unconfigured softkey, programmable key, keypad key, or expansion module key.
Notes:
• You can press the Cancel softkey at anytime during the speed dial programming to cancel and not save the
speed dial information.
• If a number on the keypad is set up as a speed dial key, pressing the applicable number in the speed dial editing
process displays the speed dial edit screen. The edit screen allows you to change the Speed Dial Number and
Line setting.
• If you press a key that is NOT set up as a speed dial key, the phone displays an Invalid Key message. However, if
you press-and-hold an empty digit key, softkey, or expansion module key set to NONE, the phone initiates the
Add a speed dial Key process, allowing you to set up a new speed dial key. For more information, see
Speed Dial Using Speed Dial 8 or Speed Dial 100"
5. In the Enter Number: field, enter a number for the speed dial key using the keypad keys. You can enter up to 16
digits in the Enter Number: field.
Note:
When in the Enter Number: field, the phone automatically switches to the numbers softkey.
Press the 2 key to move to the next field.
6.
7. In the Line: field, select a line to apply to the speed dial key. This is the line that the phone opens to dial the number
after you press the speed dial key. By default, the phone uses Line 1 for the speed dial key. If you want to use a
different line, press the Change key, or press the
8. Press the Save softkey to save the speed dial information to the speed dial key you selected.
Note:
To delete or remove a speed dial configuration from the phone, you can press the Remove key.

Speeddial/Xfer

The Speed Dial key allows a number to be dialed quickly by pressing one key configured for speed dialing. The Xfer key
allows a call to be transferred to other recipients blindly or consultatively. The Speeddial/Xfer key combines the Speed
Dial and Xfer key's functionality together, allowing you to transfer calls or use Speeddial with one key.
Note:
It is recommended that the Switch UI Focus to Ringing Line parameter be enabled when using the Speed Dial/Xfer
feature. For more information about this parameter, see
The Speeddial/Xfer key has the following capabilities:
• Speeddial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speeddial/Xfer key causes the phone
to go offhook and dial the predefined extension.
• Speeddial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speeddial/Xfer key blind trans-
fers the call to the predefined target.
If transferring a call fails, a message Transfer Failed displays, and you can reconnect the call (get the call back) by press-
ing the line key again.
• Speeddial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speeddial/Xfer key forwards the
call to the predefined extension.

Sprecode Key

Your System Administrator can set a key to automatically activate specific services offered by the server by setting a key to
Sprecode. For example, if the sprecode value of *82 is configured, then by pressing the key, *82 automatically activates a
service provided by the server. The value you enter for this field is dependent on the services provided by the server. Con-
tact your System Administrator for information about available services.
6735i/6737i User Guide for Clearspan – 2862-002 – September 2014
Line Keys, Programmable Keys, and Softkeys
.
on page 45
4 key to select another line.
"Stuttered Dial Tone"
"Creating a
on page 55.
47