Installation And Troubleshooting; General; Oftware Nstallation And Ettings - Simrad Maris ECDIS900 Technical Manual

General

Installation and Troubleshooting

The system is delivered ready to use and no installation is necessary. However, the user may
have to re-install a new version of ECDIS900.
Installing the software:
Insert the Installation DVD into the DVD-DRIVE or use the installation usb flash drive.
•
Open the DVD: double click on My Computer and on the DVD drive icon or open the
•
usb flash drive
Double click on the folder disk 1
•
Double click on the file Setup.exe and follow the instructions of the set-up program.
•
If a previous version of the ECDIS900 is installed on the hard
•
disk,
configurations, installed charts, routes and tracks.
Once the ECDIS900 application installed on the hard disk,
•
several folders containing the application, utilities and data
have been created.
ECDIS display is type approved device and should be used with
•
NOTE
factory settings. Software does not require screen resolution
and colour mode, but it is strongly recommended to use
resolution no less than 1280 * 1024.
In case the Win 7 OS the Windows Classic Theme must be set. In
•
case of using another theme, some GUI colours could be
inconsistent.
In case of technical problems
O
PERATIONAL LIMITS
O perational limits of ECDIS900 listed in the proper section.
T
ESTS
Regular tests should be performed on board to check that the system works properly.
The system is delivered ready to use and no software installation is necessary.
62
G
the set-up program
Launch and quite ECDIS900
or to order new charts please contact the
S I
OFTWARE NSTALLATION AND
ENERAL
saves the Sensor_Monitor
as described below.
S
ETTINGS
MARIS support.