Operational Limits - Simrad Maris ECDIS900 Technical Manual

Operational limits

Serial ports.
Serial cables
Sensor output set Other data
up. acquisition faulty
S_Monitor in SMonitor
configurations
C1
Serial ports. Second GPS
Ethernet com. position not
Serial cables correctly acquired
Sensor output set in the Monitoring
up. station.
S_Monitor Same on Planning
configurations Station.
O
VERSCALING CHARTS
The accuracy of the overscaled charts is not as good as it should be for a safe navigation.
O
UTPUT DATUM SELECTION FOR THE
When the GPS sensor does not deliver on serial line information about the datum used for the
positioning, ECDIS900 supposes that the datum in use is WGS84. Therefore it is required to
select the datum WGS84 in the GPS sensor.
S57
LIMITED COVERAGE
S57 database coverage is still limited therefore ARCS must be used when no vector data are
available.
70
Bad connection
with the sensor.
Sensor failure.
Bad selected data
format.
GPS2 failure.
Bad Ethernet
connection.
O
PERATIONAL LIMITS
GPS
window in
SMonitor and
check the
incoming data
format.
Select another
format (NMEA
or..) ij the
configuration
window of the
serial port
Check the output
configuration of
the GPS.
Click right button
in the GPS
indicator and
select GPS1 as
master.
Data not correctly
acquired. No See above.
display.
Second ship's
position not Check the cabling.
available (No (Serial and
cross icon Ethernet).
displayed on the Ethernet problem:
chart at the see above S1 and
second GPS S2.
location).