Table of Contents
Advertisement
2 INSTALLATION
2.1 Location of the units
2.2 Mechanical installation
Note!
20221867 / F
The units included in the CS66 system should be mounted with
special regard to the units' environmental protection,
temperature range and cable length.
The CS66 units are designed to operate within the temperature
range of 0°C to +55°C. However, it is recommended that
adequate ventilation/air-conditioning is provided in order to
keep the ambient operating temperature at +20°C.
It is also recommended that the area around the units is kept
relatively free from dust and build-up static electricity.
Installing devices are not included with the units.
MC50 Computer
The MC50 has to be mounted horizontally, and should not be
installed close to heavy transformers or similar.
Other equipment should not be stored upon the MC50 unit.
For 24V systems, the unit should be mounted as close as
possible to the FB200 Filter box as the cable length between
FB200 and MC50 is limited to 0.8 m.
The mounting location should allow access to the power button,
the CD/DVD and the floppy drive. It is also necessary to have
working area when replacing the air inlet fans' dust filter.
Refer dimensional drawing showing recommended working
area, page 36 onwards.
INSTALLATION
3
Advertisement
Table of Contents
