Input Output; General - Simrad Maris ECDIS900 Technical Manual

Hide thumbs Also See for Maris ECDIS900:

Table of Contents

Input Output

IEC 61162-1 COMPLIANCE STATEMENT

ECDIS900 digital interfaces meet all requirements of IEC 61162-1.

Sensor Monitor is the application, which manages the I/O for ECDIS.

Sensor Monitor is automatically launched when the system starts and runs in parallel with

ECDIS. With Sensor Monitor, the user selects the type of communication (Serial or Network),

configures the input media, checks the input and the communication status, selects the

Master parameters and eventually route data to other receivers.

To bring to front Sensors_Monitor, click on the icon Switch to SMonitor in the tool bar

Hardware a and connections are described in the paragraphs Hardware and Connections.

To customise the I/O according to the sensors connected to the PC, the technician must

create new sensors and adjust settings.

OOLBAR

Icon

Description

Create new sensor (by default, NMEA 0183 sensor; media type – serial; COM1;

8N1)

Open sensor configuration window for selected

ENERAL

Main Window

Table of Contents

Show Quick Links

Table of Contents