Sensors; Ethernet : Internal And External Data Flow - Simrad Maris ECDIS900 Technical Manual

Sensors

restore the complete ECDIS system (Operating system, ECDIS application, basic charts,
etc.) that has the initial configuration.
For a complete description of the interface between Sensors and ECDIS900 see
the Input/O utput chapter.
Ethernet and TCP/IP protocol are the core of the system for the intercommunication between
software modules and also for data exchange between the ECDIS Planning (Back-up) and
Monitoring stations.
I
NTERCOMMUNICATION
LAN communication is basic the technology used in the system for communication between
ECDIS900 applications. For example, the ECDIS application launches the application called
Sensor Monitor responsible for I/O of the system. This application runs in parallel with ECDIS
and manages serial and TCP/IP input/output. ECDIS and Sensor Monitor use TCP/IP protocol
for data and commands exchanging.
E
XTERNAL DATA EXCHANGE
Monitoring and Planning stations are on the same LAN and communicated using TCP/IP
protocol:
7
E :
THERNET INTERNAL AND EXTERNAL DATA FLOW
S
ENSORS