Simrad Maris ECDIS900 Technical Manual page 41

MOXA Serial Interface
2-wire RS-485
Connectors
Surge Protection
Optical Isolation
CP-134U V2
CP-134U-I V2
Operating Temperature
Storage Temperature
Humidity
Dimensions (W x D)
ME-9001 (PCI )
CARD
The Multi Port Serial Board, type ME-9001 (PCI card) offers the possibility to use 8 opto
isolated serial port RS 485 or RS 422.
The card is tested according to IEC60945, as a part of the Marine PC, which is used for the
ECDIS.
Specifications
Data transmission
ME-9100i RS232: RS232 with handshakes
•
Interfaces
ME-9100i RS485: RS422, RS485 half-duplex, RS485 full-duplex
•
Ports 4 or 8
75/110/134/150/300/600
Baud rates baud,1.2/1.8/2.4/4.8/7.2/9.6/14.4/19.2/38.4/57.6/115.2/128/230.4/460.8/921.6
kBaud
Data bits 4..8
Parity No, even, odd mark, space
Stop bits 1, 1.5 or 2
Protocol Xon/Xoff, hardware, no
Multiple UART(s), register compatible with 16550, with integrated send and
UART Type
receive FIFOs per port
FIFO size 128 bytes each
Isolation All lines: Opto-isolation up to 500 V
General Data
32 bit/33MHz StandardPCI bus or PXI/CompactPCI bus. PCI Local Bus 2.1
Bus interface
compatible
Size(mm) PCI: 136x99; PXI/Compact PCI: 160x100 (# U Europa card standard)
78-pin D-sub female; depending on version split/breakout cable with
Connectors
4x/8x 9-pin D-sub male included.
ESD protection Up to 15 kV(IEC 1000)
41
Data+(B), Data-(A), GND
DB44 Female
Embedded 15 KV ESD Surge Protection
2KV (CP-134U-I V2)
180mA(+5V)
850mA(+5V)
0 to 55°C
-20 to 85°C
5 to 95% RH
120 x 82.5 mm (4.72 x 3.24 in)(CP-134UV2) 120 x 115 mm (4.72 x
4.52 in) (CP-134U-I V2)