Refi T Window - Valor 1500IN (NG) Installation & Owner's Manual

QUALIFIED
INSTALLER
Refi t Window
1. To refi t the window, place it in its bottom railing and
push its top against the fi rebox.
2. While you hold it, pull the side levers back into the
window brackets on each side.
IMPORTANT: To ensure a safe operation,
verify that the levers are hooked properly to the
window tabs; then, pull out the top of the window
and release it to insure the springs return it.
3. Apply light hand pressure against the window frame
sides to bed-in the window seal.
4. If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
Section Views
Hot Glass Warning Plate
48
Installation
Bottom railing
Window frame