Valor 1500IN (NG) Installation & Owner's Manual page 44

L1 series
Table of Contents

Advertisement

QUALIFIED
INSTALLER
Logs and rocks
Each log has pegs to help you locate them on the
platform. Install the logs as shown below.
1. Place the rear log in the center of the fi rebox at the
rear.
NOTE: There are two holes for the left peg of this
log.
Place the log's left peg in the front hole for natural
gas (NG) fi re.
Place the log's left peg in the rear hole for propane
gas (LPG) fi res.
LPG
LPG
NG
NG
2. Place the rear left log as indicated.
3. Place the rear right log as indicated.
Logs installed
44
Installation
4. Place the front left log as indicated.
5. Place one end of the cross log on the rear center log
as indicated and rest its other end on the platform in
front of the burner.
6. Some vermiculite may be added outside the burner
on the platform if desired.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1500ip (lpg)L1 series

Table of Contents