Satellite Box - With Separate Audio And Video Connections - Creative Video Blaster Digital VCR User Manual

V B D VCR U ' G
I D E O L A S T E R I G I T A L S E R S U I D E

Satellite Box - with separate audio and video connections

To use the separate audio and video outputs from a satellite TV box, two signals must be con-
nected – audio and video. First connect the video output of the satellite box to the combination
S-Video/Composite Input on the Digital VCR card. This connection can be made with the S-
Video output of the satellite box (if available) or the standard video output. See area #1 in Dia-
gram 4 below. Connecting the coaxial output on the satellite box is not necessary.
To use the S-Video output, use a standard S-Video cable (available separately) to connect the
S-Video output of the satellite box to the Digital VCR card's video input.
When using the standard composite video output from a satellite box, most devices make this
connection with an RCA jack. This requires the use of the S-Video/Composite video adapter
cable supplied with your Digital VCR. See area #2 in the diagram below. Plug the supplied
adapter into the Digital VCR card. Plug the video output from the satellite box into the RCA end
of the adapter cable.
Next, connect the audio signal from the satellite box to the $XGLR ,QSXW on the Digital VCR
card. Audio will then be played through your computer's sound card.
Diagram 6
18
H ar d w ar e I n st all at io n : TV S i gn al T yp e s