Table of Contents
Advertisement
V
B
D
VCR U
I D E O
L A S T E R
I G I T A L
If your system is running Windows 2000 or Windows XP, follow these steps:
1. From the desktop, right-click on 0\ &RPSXWHU.
2. Select 3URSHUWLHV to open the System Properties window.
3. Select the +DUGZDUH tab.
4. In the Hardware section, click on the 'HYLFH 0DQDJHr button.
5. The Device Manager window will open.
6. In the Device Manager, make sure that the 9LHZ GHYLFHV E\ W\SH radio button is
selected.
7. Locate the 'LVN 'ULYHV item in the Device Manager list.
8. Click the plus sign () next to the Disk Drives item to expand it and show the contents.
9. Locate the entry for the hard drive that will be used for recording.
10. Double-click the drive's name to display its Properties window. (If there is no specific list-
ing for your drive you can use Generic IDE Disk Type 00, the default setting.)
11. Select the 6HWWLQJV tab.
12. In the Options section, confirm that '0$ is checked.
13. Click the 2. button to return to the Device Manager.
14. Close the Device Manager to exit.
Driver Installation
A complete installation involves two steps–installing the device driver and installing the appli-
cation software. The device driver is the software that allows your PC to communicate with
your new Digital VCR card.
'
G
S E R
S
U I D E
So ft war e I n st all at io n : DMA
20
Advertisement
Table of Contents
