Hardware Installation; Installing The Digital Vcr Hardware In Your Pc; Install The Digital Vcr Card - Creative Video Blaster Digital VCR User Manual

V B D VCR U
I D E O L A S T E R I G I T A L
H
ARDWARE

Installing the Digital VCR Hardware in Your PC

Complete installation involves adding the Digital VCR card to your PC, connecting the Infrared
Receiver, and connecting your television signals to the card.

Install the Digital VCR card

1
2 7 (
VNLS WKLV VWHS
Follow these steps to install the Digital VCR card:
1. Turn off the power to your computer and any connected devices.
2. Disconnect the power cord from the electrical source.
3. Touch a metal surface on the computer to ground yourself and discharge any static elec-
tricity.
4. Remove the cover from the computer.
5. Locate a free PCI expansion slot for the Digital VCR card.
6. Remove the screw and metal cover plate from the expansion slot.
7. Align the Digital VCR card with the PCI slot and press it into the slot. The card must be
seated firmly in the slot.
8. Secure the Digital VCR card with the screw removed from the slot cover.
9. Replace the cover on the computer.
' G
S E R S U I D E
I
NSTALLATION
,I \RX SXUFKDVHG \RXU 3& ZLWK WKH 'LJLWDO 9&5 FDUG SUHLQVWDOOHG \RX FDQ
H ard war e I ns t all at io n : In st al l t h e Di gi ta l VCR c ard

11