Setup; Unpacking; Setting Up The Scanner - Datalogic Heron HD3130 Product Reference Manual

Unpacking

Check carefully to ensure the scanner and any cables or accessories ordered are
present and undamaged. If any damage occurred during shipment, contact
Technical Support on page 3.
KEEP THE PACKAGING. Should the unit ever require service, it should be
returned in its original shipping container.

Setting Up the Scanner

Follow the steps provided in this section to connect and get your scanner up
and communicating with its host:
1. Connect the Interface Cable at the scanner as shown in Figure 2. To dis-
connect the cable, insert a paper clip or similar object into the opening
shown (item #3).
2. Connect the other end to the Host (see the next section,
face on page 6
3. Modify
are needed from factory settings).
Figure 2. Cable Connection/Disconnection at the Scanner
r
Product Reference Guide
and Figure 3).
"Customizing Configuration Settings" on page 14
Cable Connector
Paper clip
Chapter 2

Setup

Connect Host Inter-
(only if modifications
5