Ack Nak Retry Count; Ack Nak Retry Count - Datalogic Heron HD3130 Product Reference Manual

RS-232/USB-COM Interfaces

ACK NAK Retry Count

This feature specifies the number of times the scanner retries a label transmis-
sion due to a retry condition. The selectable range is from 1 to 254 retries. A
selection of 0 disables the count, and a selection of 255 specifies unlimited
retries. See
ming instructions.
Select ACK NAK Retry Count Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide

"ACK NAK Retry Count"

$CR2AR
003 = 3 Retries
DEFAULT
Enter/Exit Programming Mode
on page 223 for more detailed program-
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Appendix D, Key-
~
31