I 2 Of 5 Set Length 1 - Datalogic Heron HD3130 Product Reference Manual

Symbologies

I 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
page
148 Mode, or the first fixed length if in
length includes the bar code's check and data characters.
The length can be set from 2 to 50 characters in increments of two. See
Length 1"
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
142. Length 1 is the minimum label length if in
on page 245 for more detailed programming instructions.
$CI2L1
06 = Length 1 is 6 Characters
DEFAULT
Enter/Exit Programming Mode
I 2 of 5 Length Control on
Variable Length on page
Fixed Length on page 148
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Mode. The
"Set
Appendix D, Key-
~
143