Label Id: Set Individually Per Symbology; Label Id Control - Datalogic Heron HD3130 Product Reference Manual

Data Format

Label ID: Set Individually Per Symbology

This feature configures a Label ID individually for a single symbology.

Label ID Control

This option controls whether a Label ID is disabled, or sent as a prefix or suffix
for a given symbology type.
DEFAULT
$CIDCO01
Label ID Transmission = Enable as Prefix
Product Reference Guide
This setting requires the scanning of bar codes from multiple
sections. See "Label ID: Set Individually Per Symbology"
on page 234 for more detailed programming instructions.
NOTE
~
CANCEL
Enter/Exit Programming Mode
$CIDCO00
Label ID Transmission = Disable
$CIDCO02
Label ID Transmission = Enable as Suffix
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
53