Global Prefix/Suffix; Global Prefix /Suffix - Datalogic Heron HD3130 Product Reference Manual

Enter/Exit Programming Mode

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the bar
code data) and/or as a suffix (in a position following the bar code data). See
"Global Prefix/Suffix"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
senting your desired character(s). End by scanning the
ENTER/EXIT bar code again.
Set Global Suffix
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
50
on page 230 for more detailed programming instructions.
Appendix D, Keypad
$CLFSU
DEFAULT
repre-
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
resenting your desired character(s). End by scanning the
ENTER/EXIT bar code again.
No Global Prefix
Global Suffix = 0x0D(CR)
Global Prefix/Suffix
$CLFPR
Set Global Prefix
Appendix D, Keypad
~
CANCEL
Heron™ HD3130
rep-