Good Read: When To Indicate - Datalogic Heron HD3130 Product Reference Manual

Enter/Exit Programming Mode

Good Read: When to Indicate

This feature specifies when the scanner will provide indication (beep or Jingle
and/or LED) upon successfully reading a bar code. Choices are:
•
•
•
NOTE
DEFAULT
$CBPIN01
Indicate Good Read = After Transmit
72
Good Read = Indicate after decode
Good Read = Indicate after transmit
Good Read = Indicate after CTS goes inactive, then activ
This option, which uses CTS, is only valid for RS-232 interfaces.

$CBPIN00
Indicate Good Read = After Decode
$CBPIN02
Indicate Good Read = After CTS Goes Inactive, Then Active
Audio Jingles
e


Heron™ HD3130