Code 39 Set Length 1 - Datalogic Heron HD3130 Product Reference Manual

Symbologies

Code 39 Set Length 1

This feature specifies one of the bar code lengths for
on page
page 120
Length includes the bar code's check, data, and full-ASCII shift characters. The
length does not include start/stop characters.
The length can be set from 0 to 50 characters. See
for more detailed programming instructions.
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
120. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
$CC3L1
02 = Length 1 is 2 Characters
DEFAULT
Enter/Exit Programming Mode
Code 39 Length Control
Fixed Length on page 120
"Set Length 1"
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Variable Length on
Mode.
on page 245
Appendix D, Key-
~
121